Noise Figure Measurement Comparison

When Do I Use What Type of Instrument?Noise Figure measurements can be difficult, especially in determining when to use what type of instrument.

In this webinar, Keysight Fellow Dr. Joel Dunsmore will show Noise Figure measurements on multiple instruments such as:

This will be a direct comparison showing demonstrations of each of these solutions in the lab.

Dr. Joel Dunsmore

R&D Fellow

Since graduating from Oregon State University with an MSEE (1983), Joel Dunsmore has worked for Keysight Technologies (formerly Agilent and Hewlett-Packard) at the Santa Rosa Site. He received his Ph.D. from Leeds University in 2004. He is a Keysight R&D Fellow focused on component test. He was a principal contributor to the HP 8753 and PNA family of network analyzers, with recent work in non-linear test, including differential devices, and mixer measurements, as well as modulated and spectrum measurements. He was principally responsible for many of fundamental algorithm designs in the PNA applications including the frequency converter, spectrum-analyzer, gain compression, IQ, and Hot S-parameter measurements. He has received 33 patents related to this work, and authored the “Handbook of Microwave Component Measurements, 2nd Edition (John Wiley, 2020)”. He is a senior member in the IEEE and MTT, as well as an executive committee member of the Automated RF Techniques Group (ARFTG).

Register to watch on demand

First Name*

Error: Please enter your first name.

Last Name*

Error: Please enter your last name.

Your Email*

Error: Please enter your email.

Country or Area*

This field is required.

Company*

This field is required.

Industry*

This field is required.

Business Phone*

This field is required.

I would like to receive event information and other educational emails from Keysight.