Special Offer: Get 50% off your first 2 months when you do one of the following
Personalized offer codes will be given in each session

Noise Figure Measurement Comparison

About This Webinar

When Do I Use What Type of Instrument?

Noise Figure measurements can be difficult, especially determining when to use what type of instrument.

In this webinar, Keysight Fellow Dr. Joel Dunsmore will show Noise Figure measurements on multiple instruments such as:

  • Network Analyzer
  • Signal Analyzer
  • Noise Figure Analyzer

  • This will be a direct comparison showing demonstrations of each of these solutions in the lab.

    Who can view: Everyone
    Webinar Price: Free
    Featured Presenters
    Webinar hosting presenter
    R&D Fellow
    Since graduating from Oregon State University with an MSEE (1983), Joel Dunsmore has worked for Keysight Technologies (formerly Agilent and Hewlett-Packard) at the Santa Rosa Site. He received his Ph.D. from Leeds University in 2004. He is a Keysight R&D Fellow focused on component test. He was a principal contributor to the HP 8753 and PNA family of network analyzers, with recent work in non-linear test, including differential devices, and mixer measurements, as well as modulated and spectrum measurements. He was principally responsible for many of fundamental algorithm designs in the PNA applications including the frequency converter, spectrum-analyzer, gain compression, IQ, and Hot S-parameter measurements. He has received 33 patents related to this work, and authored the “Handbook of Microwave Component Measurements, 2nd Edition (John Wiley, 2020)”. He is a senior member in the IEEE and MTT, as well as an executive committee member of the Automated RF Techniques Group (ARFTG).
    Documents
    1660841613-8528cd5719319daa
    Dr. Joel's Handbook of Microwave Component Measurements
    1660841672-5b325cf35da13e01
    View other events form Keysight
    Recommended