Back to Basic
About this Event
Fast moving technologies and development of new electronics application requires the fundamental knowledge of test and measurement. In this track, you will learn the fundamental of Power/RF/Digital test. More on above, we will know how Keysight responds to rapid changes with solutions Keysight provides to customers to make them success.

"Register for Series" allows you to have a collection of webinars with one registration. So that you will have all the valuable information in one go.
This Event Has 6 Sections
  • 10:00 AM SGT (GMT+8) | 28 March 2023
    DC and AC Power Fundamentals
    Tuesday, March 28, 2023 · 10:00 AM +08
    We’ll cover theoretical topics of electrical power including: Resistance and resistivity, RMS power, real versus apparent power (power factor),
    AC power (resistive, capacitive, and inductive loading), Power transmission and three-phase power, and power conversion (e.g. AC-to-DC and DC-to-DC).

    Presenter: Alan Wadsworth, Keysight
  • 11:00 AM SGT (GMT+8) | 28 March 2023
    Power Source and Electronic Load Basics
    Tuesday, March 28, 2023 · 11:00 AM +08
    We’ll cover theoretical topics of various types of sources such as two-quadrant power supplies, source measurement units (SMUs), and regenerative power supplies.
    We’ll also review DC electronic load operation and applications. To enable selection of the right power source and electronic load for your application,
    our Keysight expert will offer tips on interpreting specification sheets and determining the right power solution for the given task.

    Presenter: Alan Wadsworth, Keysight
  • 10:00 AM SGT (GMT+8) | 29 March 2023
    Signal Generation and Digital Modulation
    Wednesday, March 29, 2023 · 10:00 AM +08
    In this webinar, we will first cover CW signal generation and characteristics, including phase-noise and signal synthesis using VCO’s and phase-locked loops. Next, we will discuss analog and digital modulation generation and measurement techniques.

    Presenter: Bill Blakely, Keysight
  • 11:00 AM SGT (GMT+8) | 29 March 2023
    Spectrum Analysis Fundamentals
    Wednesday, March 29, 2023 · 11:00 AM +08
    In this webinar, we will cover swept tuned and FFT receiver techniques and the optimization of spectral search techniques including RBW, VBW and dynamic range criteria for the most accurate measurements. Distortion and noise contributions are described as well.

    Presenter: Joel Nelson, Keysight
  • 10:00 AM SGT (GMT+8) | 30 March 2023
    Tips and Tricks to Improve Your Oscilloscope Measurements
    Thursday, March 30, 2023 · 10:00 AM +08
    When debugging or validating your design, it is important to understand both the measurement capabilities of your oscilloscope and the different factors that influence the effectiveness of specific measurements.
    These factors include waveform update rate, gated measurements, automated statistics, jitter, advanced triggering capabilities and the application of analysis software tools.

    Presenter: Alan Wadsworth, Keysight
  • 11:00 AM SGT (GMT+8) | 30 March 2023
    Debugging Techniques with Infiniium Oscilloscopes
    Thursday, March 30, 2023 · 11:00 AM +08
    Basic but little-known functions to the latest advanced functions, we will introduce you how to use oscilloscopes in an easy-to-understand manner. In this age when measurement accuracy and speed are in high demand, why not review your measurement skills?

    Presenter: Wai Cheong Ng, Keysight
Get Started Now