Desktop banner Mobile banner

Keysight EDA Connect World Tour: Cork

Thursday, May 23 | 9:30 a.m.

Register

Location: Cork

What this event is about:

During this seminar we will address some of the latest developments in our Keysight’s EDA software, that help you to make you more efficient when doing your high frequency design.


Morning session:

Latest technologies drive for more bandwidth and higher frequencies. Power Amplifier (PA) designers are challenged with high peak-to average ratios, while maintaining high power added efficiency and linearity. Load pull techniques are used to determine optimal load impedances to present to their devices to attain performance objectives (such as power, gain, efficiency, error vector magnitude, adjacent channel power rejection, etc.). Furthermore, applying Digital Pre-Distortion (DPD) and Envelop Tracking help to achieve performance improvements of your PA. During this session you will learn form an expert how to do the above mentioned analysis before going to prototype in PathWave ADS.


Afternoon session:

Industry trends in RF and Microwave Design are driven by more functionality, higher bandwidth in smaller packages. Denser integration and more complex integrated modules require circuit simulation to be combined with 3D electromagnetic (EM) simulation to account for inevitable parasitic and coupling effects. You will learn now to assemble and analyze multi-technology components and to do 3DEM-circuit co-simulation iteratively during design tweaks; and not just as a final sign off verification before hardware fabrication. Also, the system aspect is a powerful way to expedite the development cycle. Validate your system design with realistic modulated signals and extract authentic time-domain metrics like EVM and BER. Experience how RF system Explorer unites circuit and system designers into a contiguous workflow.


Check the topics we will cover below and register to save your seat. Hope to meet you soon!


Agenda

09:00 | Registrations & Welcome Coffee

09:30 | Power Amplifier Design

Presenter: Andy Howard – Keysight

  •  Load pull simulation
  •  Working with measured load pull data
  •  Simulating pre-distortion
  •  Doherty power amplifier design
  •  Simulating envelop tracking
  •  Simulating noise power ratio

12:30 | Lunch & Networking

13:15 | EDA 2024 Connect

Presenter: Dr. Priya Shingal - Keysight

  • Introduction
  • Rapid EM-Circuit Co-Design of Microwave ICs, Packages and   Modules
  • Solving 3D Module Integration Challenges for High-Performance Microwave Design
  • A Primer on Spectrasys, Phased Array Analysis, and Data Flow Simulation
  • New System Verification Tools in ADS in Circuit Designers
 16:30 | Closing

Presenters

  • Andy Howard
    Senior Application Engineer - Keysight Technologies
    Andy Howard, Senior Applications Engineer, has been with Keysight since 1985. He graduated from U.C. Berkeley, B.S. E.E., 1983, and M.S. E.E., 1985. He was a visiting researcher for one year in Japan while a graduate student, and is fluent in Japanese. He has published more than 20 magazine articles, HP or Agilent seminar papers, and application notes. He has created hundreds of ADS examples, and is currently focused primarily on various power amplifier simulations (load pull, envelope tracking, optimizations, etc.) He has also worked on several switched-mode power supply simulations.
  • Dr. Priya Shinghal
    Solutions Engineer - Keysight Technologies
    Dr. Priya Shinghal is a Solutions Engineer at Keysight Technologies supporting Keysight’s customer base in the UK & Ireland using EDA tools such as ADS, RFPro, EMPro for RF&uW applications. She has 12+ years of hands-on experience in design & development of RF, microwave, and mm-wave MMICs for various applications.
Keysight EDA Connect World Tour: Cork